Recent content by AlexKots

So it means that the door station has interference problem communicating through high speed and long distance cable. Problem that have never occurred with cameras, even some of them have longer cables and are fed through the same PoE switch type, 5 port Tenda. The PoE switch of my door station...

No, I can't say that I have solved the problem. I have found some "solutions" to overpass it, but not solve it. The mobile application some times is "loosing" the connection when it is going outside the house wifi to 4G, or returning to it. In such case you have to got to Settings, Applications...

Thanks. I have seen also this problem (occasionally) when for some reason I was cutting the power to outdoor unit. But since I am using a PowerWalker UPS with battery for giving power to all network devices, I do not have such issues. The problem is that for an unknown reason the outdoor looses...

Thanks, it seems it's a different problem, but I will check the unit with "safe" power.

Thanks for the reply. As I understand you had a "typical" 12V power adapter for the external unit and you change it with the PowerWalker? Or you was feeding power through PoE? I am asking because I do not power the unit with 12V, but with PoE through the ethernet cable from a Tenda PoE switch.

In order to call each Indoor device by different button, each device should not be set as extension but as Indoor Station. And they must have their own room and call number (call number is different from room number), because each button can be assigned to call numbers, not rooms or IPs.

You saying about setting an IP for the SIP server on each monitor. Monitors do not have SIP servers, a SIP server is something separate that you probably do not have in your system. You must set the SIP Server IP Address to 0.0.0.0, and then set the (Main) Door Station IP Address to the IP...

I have bought a DS-KV8213-WME1 2 button Villa Door Station and have connected it to two DS-KH6320-WTE1 Indoor Stations. All of them are connected to the same LAN through wired connections. I have assigned one door button to one indoor device and the other button to the other device. I have also...