Recent content by Bernagh

I have to comment that Hik are getting there sloooowly. 4.21.005 firmware on the I-Series does enable Safari to view images plug-in free BUT they have a bit of an issue. Live view and configuration will only stream the main stream NOT the sub stream. If you select sub stream you get a blank...

It is a standard issue on the current version of OS X Mojave. The bigger issue is that when Apple release OS X Catalina in October, iVMS may not work at all. This is Apple's warning that support for the libraries it uses are about to be deprecated and will not work in the future. The issue is...

Thanks for the suggestion Stewart. I am seeing a PoE power supply exception every hour. The IP camera disconnects (with one exception (10 minutes ago), which were occurring in the log at 10 to 20 a day have stopped, coinciding with applying the .005 patch to v4.21 NVR software. I will check...

I have now applied the firmware versions for the cameras as you suggested without any improvement. What I have noted is that the 2 cameras with the issue are rebooting simultaneously. I have video loss email alerts set up and both cameras are dropping at the same time. 5 reboots since...

DS-2CD2T35FWD-I5 v5.5.51 DS-2CD2042WD-I v5.5.5 I believe this is the latest for these models. The issue has only started since the upgrade from NVR v4.1 to v4.2. The other cameras are on 5.5.71, 5.4.5 and 5.4.5, they have not seen this issue.

DS-7608NI-I2 / 8P Firmware is great as every works via the browser again. One problem, consistently, on a daily basis. Two cameras out of 5 connected reboot and after the reboot they have enable motion detection and enable dynamic analysis for dynamic both set and the area being monitored set...

I have tried v4.21. The great news is that with v4.21 I can now use the latest version of Safari via a browser interface to set the line crossing and all other event areas again :). Live View and Playback are also now working in Safari. The only issue is that I can only Live View and Playback...

Just tried 1.02.02, cannot even get the Image and Event view screens, it completely crashes every time I try and navigate to the this screen. Also tried the Windows version v2.8.2.2, exactly the same as the Mac OS version, main view and replay work fine, cannot get to Images and Events.

I am not getting Data Error [11] in fact I get no error at all, the Image and Event preview images from the camera just never load. No error makes it challenging to know where to start. Definitely not a Error 11.

I am having similar issues. New MBP running latest OS X so installed the latest iVMS 2.0.0.5. Connecting to 7608NI running 4.1.67. Live view and play back are working in iVMS, but I cannot see an image in the Image or Event preview screens, so makes drawing lines for detection impossible...