Recent content by jacques

Okay, I found software that allows me to flash the firmware "hikvision tool manager" "batch software" but it still doesn't work firmware IPD_R7_EN_STD_5.6.0_190128 stops at around 10% firmware IPD_R7_EN_STD_5.6.11_190426 stops at around 20% of course all other firmware before or after don't work...

I managed to change it through sadp I found my connection through Synology station still no interface

Yes, but I still can't access the interface to do this I try another reset

OK name no conflict I checked on the Asus router the interface still does not connecton sadp I see that port 8000 instead of 8080 or 80alone

New 192.168.1.64

I have a new IP, I activated the cam by SADP I can't find the default connection login ? password ?

Thank you, I will do it now and let you know

There is no software at hikvision to do an update with a command line

No, I can't, as soon as I go to the forward configuration the image freezes. This is not the case for other cameras. I can't close or move the window

Normally yes, but I have a doubt about the 2nd camera which failed, I can no longer access the web interfaceI also tried to update with IVMS-4200 the interface does not help me. However, I see the image clearly.

1 er photo cam 1 ok 2ᵉ photo cam 3

Thank you for your prompt responseusually I update all 3 cameras at the same time but I still have doubts about the 2nd camera as it didn't work

Good morning. Sorry, I don't speak English well, I'm using a translator. I have 3 cameras DS-2DE3304W-DEI and wanted to update the firmware as in the documentation, it is specified to install version version 5.6.11. So I installed the IPD_R7_EN_STD_5.6.11_190426 then...