JB1970's latest activity
-
JB1970 replied to the thread Leaving house - reset factory settings for handover?.Initially just change your admin password to something else (they can change it again later). Changing your admin password won't affect... -
JB1970 replied to the thread Best Indoor WiFi Camera?.The camera I'm using only has Basic events (motion detection). If you're using an NXI model NVR you may be able to use the NVR for...
-
JB1970 replied to the thread Best Indoor WiFi Camera?.You can still remove it from the EZVIZ app. Motion detection can be set up from the NVR in the usual way. Otherwise you end up in a...
-
JB1970 replied to the thread Best Indoor WiFi Camera?.I've also used the EZVIZ WiFi cameras a few times. There's a bit of a learning curve to get them going initially with a Hikvision NVR...
-
JB1970 replied to the thread Hikconnect issues / VCAs.Yeah apparently Virgin do it a bit differently and the ONT is actually part of their Hub 5 (they have a different version of the Hub 5...
-
-
Just regarding this. I’m not exactly sure if virgin xgs pon is the same. But for openreach fttp their ont serves as the modem. I’ve...
-
JB1970 replied to the thread Hikconnect issues / VCAs.If you have different login details the 'owner' (the account to which the NVR is registered) is in control of sharing to other users...
-
JB1970 replied to the thread Hikconnect issues / VCAs.If all three of you are using the same Hik-Connect login, then yes. However the app view on the other phones doesn't dynamically...
-
JB1970 replied to the thread Hikconnect issues / VCAs.UniFi has been great for me. I have a UDR as my router and two separate U6 Lite APs - one upstairs and one in the garage which also...
-
JB1970 replied to the thread Hikconnect issues / VCAs.Even that would probably prove an issue for me. I believe that VMs XGSPON version of the Hub 5 cannot be put into bridged mode/modem...
-
JB1970 replied to the thread Hikconnect issues / VCAs.Interesting. I do see the choppy playback myself at times. It's almost regular in that it'll play for a second pause for a second when...
-
@JB1970 I hope you’re doing well. I think I’ve got to the bottom of the issue I was having with high bitrate settings causing choppy...
-
Thank you for getting into the detail on that. I had changed my exp settings for all cams by the NVR gui (M2 8p on v4) hence my...
-
JB1970 replied to the thread Hikvision Min. Illumination.I think I noticed it on V5 on my VPro but I haven't tested/checked it since the last update. A bit of a long winded explanation...
-
-
JB1970 replied to the thread Hikvision Min. Illumination.AGC by default is set to 100% gain. In Auto mode the camera will set the gain at what it needs up to 100. The only way you can control...
