Recent content by M-J-B

Hi, Although traffic to the NVR can be configured as HTTPS, and direct camera access can be configured as HTTPS, this Channel Access port is still plain HTTP possibly revealing the logon credentials to anyone who cares to listen. Is there any update expected to this allowing HTTPS and private...

True, it's good to know updates are in the pipeline. I believe the hardware is pretty good spec but it takes some time and patience to get it working as expected. Based on the Milesight hype I assumed the basics would have been better sorted by now... but let's hope and assume that the next...

Currently I haven't activated any of the camera features that are not available in the NVR interface. All I have activated is continuous recording, the basic motion detection which activates the e-mail function with 100s intervals, P2P, and attempts to activate DDNS. Camera transport protocol is...

My router only accepts dyn.com so I thought why not use some of the free alternatives offered by the NVR. Replacing the router would probably the best alternative in the long run anyway, but Milesight should deliver what they promise. It seems to me there is a lot of development going on...

Hi, Has anyone had any success configuring DDNS with the latest firmware? Milesight supposedly have their own DDNS service, but for some reason it is not an option in the NVR firmware. I have configured no-ip.com but the changed IP doesn't update to their service. I have double checked my...

Hi, I have also been testing this today and finally I came to the conclusion that NFS is the only method that is working for NAS. Quite fiddly all in all. I tested NFS with QNAP NAS and it works with NAS connected to LAN, or alternatively with NAS connected to PoE port of NVR. However, the...

Now that was interesting! I upgraded succesfully to the UI version of V9. VCA menus are now gone, that was expected as the functionality wasn't there yet. Formatting of the internal HDD was also expected, but surprisingly my USB stick I used for the upgrade is no longer accessible by the NVR...

Hi, Any update on this topic? I can see the Smart Event settings in the NVR but I can't get the NVR to record anything regardless if I set the parameters in the NVR interface or the camera interface. In camera interface I can see that the Smart Event is triggered but the NVR doesn't react...