Recent content by Puzzledman1

Hello, I have had non stop problems from the beginning with my NVR allowing 11 x 8mp 4K cameras to connect and record contentiously for a period of time, usually upto 5 days of working fine, and then one or two cameras all of sudden will show no video within there square on the monitor and...

Hello, Thank you for all your help. I really appreciate your time. Ironically one of the big motorised cams has out of no where sprung to life again just now. So (currently) now 7 working and 3 small bullet cams not

Hello, Only 6 out of 10 cameras that are wired in are showing on this system as connected. The cams showing connected are 2 of the big motorised cams, 2 of the baby bullet cams and the two dome cams. 1 x big motorised bullet cam, 3 x baby bullet cams are connected to nvr but showing as...

channels 4 and 5 should be connected but say disconnected

Hi Dan, Thank you again. I have just seen this. Is this relevant to what you have been describing?

Thank you so much for your message. Would this mean if I purchased a POE switch box and connected the 4 xbig motorised cameras into the switch box I could then connect the Poe switch into the NVR but still have the 7 x smaller cameras connected to the NVR at the same time?.

Hello, I hope the below details are what you need but if it is something else please let me know. The NVR is Zxtech Onyx 25 Channel 16-PoE Ports 8MP 4K CCTV High Definition Network Recorder The cameras are 4x Zxtech Premio 4K Motorized PoE IP CCTV Camera 5x Zxtech...

Hello, I have recently upgraded(I hope) from an AHD system to a 25 channel(12 ip) Onyx NVR with an 8TB hard drive. I have purchased 11 new IP 4K 8mp cameras of around £100 and £135 each from the same company. The cameras are now fitted externally and connected with cat6a external cables into...