Search results

@trempa92 I tried them all now and still no luck. I even tried going back to the older one on the UK web site (V5.7.80_230712) but it won't let me do that either. This sucks...

Hi @trempa92 I tried V5.8.50_240306 and it's the same - didn't work. This camera is on V5.8.20_231024 which I must have downloaded from the global site I think. That version/revision is not even listed on the Euro portal link you posted. I did also try V5.8.40_231023 as that seemed to be...

@trempa92 I tested higher exposure settings (1/4000 and above) and the image gets super-grainy but the amount of light getting in still does not seem to reduce. For example, an image at 1/4000: Although the camera DOES seem to capture more plates at 1/4000 so some success I guess. And as I...

@trempa92 today I tried to upgrade my H8 which was on the 5.8.20 firmware to the 5.8.60 but it does not seem to accept it... When I click the "Upgrade" button then click o.k. I get an "Upgrading" dialog with progress. It stays at 0 for a few minutes then just returns to the "Maintenance" page...

@trempa92 thanks and yes, I agree and I have exactly that setup - anywhere with an ANPR I have a normal camera too. With older cameras I always set to 1/2000 and no problems - black screen as you say at night but successful capture of plates. But these new H8 camera sensors just seem to let...

@trempa92 here are the settings for the problem H8 camera. Any advice appreciated. It's a narrow-ish country road where vehicles could be to one side of the road or could be in the middle of the road, on a bend where vehicles generally will be going fairly slow as I said before. No problems with...

@Phil, no prob, but, I am pretty sure the answer is no as the FTP config is on the camera, I could not see any FTP config on the NVR so I couldn't see the M Series being any different to older models in that regard. Some previous installs I have most cameras connected to NVR then a small PoE...

@trempa92 thanks, I used to set my old ANPR cameras to 1/2000 to successfully capture at night but the H8 guide says: Speed < 30km/h — Exposure Time : 1/150-1/200; 30km/h < Speed < 60km/h — Exposure Time : 1/250-1/500; 60km/h < Speed — Exposure Time : 1/500-1/1000 I guess my estimate of 30mph =...

I have a few of the newer H8 ANPR cameras iDS-2CD7A26G0/P-IZHSY I have experience with the older versions of these cameras and know how to tweak exposure settings etc on those to get reliable plate capture day and night. However, the new H8 models have very different camera sensors which seem...

I am reasonably sure the cloud it's talking about is the Pyronix Cloud (https://www.pyronixcloud.com/). You can register an account but the first thing it asks is to "Register New System" where it needs "System ID" and "Cloud Password (as entered in the alarm panel)". So your alarm installer...

@trempa92 The newest H8 I have (on I have on 5.7.80) has: "Region" dropdown with only a single entry "Europe Region". Then it has: "Country/Region" dropdown with a large list of countries (mostly Europe but a few others like Russia). I do actually have another one of these cameras which I...

@trempa92 thanks for the info, so just to clarify: HikVision Global Site has this page iDS-2CD7A26G0/P-IZHS(Y) with Firmware_V5.8.60_240807 HikVision UK Site has this page iDS-2CD7A26G0/P-IZHSY#UK with Firmware_V5.7.80_230712 My serial number does have WR in it ...AAWRFB... so are you saying...

@trempa92 thanks but I don't ever risk installing any HikVision firmware other than those listed on the UK web site now. I am sure the global one will work but I have had major issues with HikVision firmwares before, the worst instance when I updated a camera with newer firmware which was not on...

If the 4G provider offers a static IP address and the 4G router offers the capability of VPN etc then this should technically work. Although to access on mobile phone, if you are using the Hik-Connect service it should work fine as that works via internet/cloud. If you want to connect...

@trempa92 I should of said in my post, it came shipped with the latest firmware currently V5.7.80_230712 (in the UK at least).

I have a new ANPR camera model iDS-2CD7A26G0/P-IZHSY (H8) Running latest firmware currently V5.7.80_230712 (in the UK). On some PC's/browsers (e.g. Firefox on Windows) the very top bar in the web camera interface shows 4 options: Live View Configuration Smart Display VCA But on other...

HikVision do have a habit of regularly changing the sizes of back boxes and/or screw hole positions *just slightly* to make them incompatible with older models, why they just can't decide on some standards I don't know... If the proper one isn't available anywhere then: Not my handiwork but I...

Where are you setting the white balance modes - via the native NVR interface or via NVR web interface or via the camera web interface? The only thing I can suggest to try is checking/setting camera settings but on the actual native NVR interface. I have not had issues with white balance but I...

@Jake Many thanks. those must be updated specs as I was looking at HikVision spec sheets elsewhere which say nothing about installation!

Anyone bought HikVision switches in the past? I was looking at a 16 port HikVision PoE switch, such as: DS-3E1318P-EI or DS-3E1518P-SI Does anyone know if these come with rack-mount brackets? The specs say nothing about brackets, the manuals say nothing either, some PDF docs I have seen show...