Search results

The 8 x POE ports on your NVR are in a separate, totally unique network (or "Broadcast Domain") from the LAN port connected to your home network. The NVR does NOT copy (or "route") Ethernet packets from the 192.168.0.xxx network (your LAN port) to the 192.168.254.xxx network (8 x POE ports) or...

Don't get "too" concerned re: saturating the inter-switch link, just yet. I don't have your environment to test with, but looking at my own switches & individual camera links running @ 100Mbs..... then with a bit of math I'll offer this: with 4 cameras sharing a single 100Mbs link: keep your...

you need to manually set a VALID IP address on each of the 4 remote cameras. Use the same IP address "range" that is defined within your NVR. That range might be "192.168.254.xxx" (or it might be some other IP range. Depends how you previously set that up). use SADP to create the valid IP...

FYI..... I noticed Release Notes are now available for v5.04.050 v5.04.050 Release Notes

This likely falls in the category of "who really cares ?" FWIW, this is just a small heads up on how NTP has changed with HIK's recent firmware changes. It likely applies wherever you have a Time Server configured. prior to 2025, the M Series NVR (and G5 cameras) would send out a "single" NTP...

I'm not familiar with "all" the functions of that camera.... accordingly I can't comment on what functionality would be missing with only 30W available vs. 42W needed. Maybe someone else can weigh in. It appears a device (injector or switch) that supports the: IEEE802.3bt Type 3 (60W) or...

Typically, the POE+ switches I'm used to, supply a max of 30W per port. Your switch "might" be different. Log into the switch, and look for diagnostics of some type. Most switches will tell you how many Watts a port is drawing.... or if it's max'd out. If you have access to a POE++...

I was trying to keep you from climbing up on a ladder or roof. :) Good luck. A factory reset should do it.

Off the top of my head: do you have an old, spare, wireless router that you can temporarily plug into an NVR POE port ? can you borrow a laptop with a wired Ethernet port ? do you have a spare POE switch or any POE Injectors ? what other networking equipment do you have that we can temporarily...

192.168.254.2 is probably sitting behind a POE NVR then. Yes ? There's probably a way via Virtual Host but I'm not so sure what port # that would be. Some one else might know. As a workaround: plug your laptop (or PC) into a spare POE port on the NVR MANUALLY set your laptop to an address...

Provided you're still using the "default" ports, specify port 443, as in: xxhttps://192.168.xxx.xxx:443 substitute 192.168.xxx.xxx for the actual IP address of your camera (or NVR). That should get you a login screen. And drop the xx from xxhttps.

I'm struggling to understand what you're telling & "not" telling us: you tagged this thread with HIK-Connect. Your questions seem unrelated to HIK-Connect. Am I missing something ? you've indicated you have (maybe) 3 subnets in play. Yet, you're trying to get to 1 subnet. What network mask...

Best you start a new thread...... include, at a minimum, the equipment model #'s (DVRs & cameras) and what you've done to attempt to diagnose the problem. I don't have any DVRs to test with, so chances are I won't have the answers you seek. If it's just an IP network issue, the SADP tool (on...

if it helps..... I could have fabricated a fancy bracket to offset the new fan from the vent holes. But why go to all that trouble ? I found that some "hook & loop" velcro (aka double sided velcro) worked just as well. Used it to hold both the new fan & SSDs in place. Sometimes simple is...

On my DS-7616NI-M2 .... yes, my SATA SSDs were plug & format & play. You'll need to figure out a way to hold them in place so they don't flop around. But power cable + SATA cable just plug in & go. The loudest noise will be your fan. Find a quieter one like, Noctua A4x20 FLX or A4x10 FLX...

Just a FYI..... if you have Panoramic cameras. Updated firmware available from the usual Product pages. And to my surprise, HIK included Release Notes this time. 2 pages. Here's a link to the PDF -> v5.7.20 Release Notes

For some added completeness , here's the Email config page from NVR Firmware Version V5.04.020 build 241106

Not sure if I understand your issue. Are you having problems using Gmail's SMTP service ? It does work, you just need the 2 Step Verification activated on your Gmail account. It goes something like this: login into your Gmail Account (this is the account were your NVR sends e-mails & then...

FYI, I've been looking into this on the newly installed v5.04.020 firmware on my DS-7616NI-M2. I was able to duplicate something similar..... similar but not identical. I do NOT know if this issue existed at v5.03.xxx firmware..... I didn't test for it. Some observations, etc: are you on...

JB..... I'm thinking from your later post, you have this sorted...... so this is just an FYI for any new followers watching this thread. The process I followed: Late yesterday, I checked for v5.04.020 on the Product Pages of "DS-7616NI-M2" or "DS-7616NI-M2/16P" at these countries: Singapore...