Search results

I also updated Hik-Connect the other day from 6.9.880 to 6.10.0. I just took a walk outside to test this... push notification came thought instantly... I think you may just be experiencing a temporary delay due to cell service... my guess is yours starts working instantly again soon. I was...

Hmmm... that's a new one...can you post a screenshot showing the error?

Good stuff!

I'm not sure what you mean by a bulge... if you bend the cable 90 degrees or more you might see a bulge, but if the cable is working after the bend, it will probably continue to work... if you could take a picture of the bulge?... but I still think that cables don't fail unless something is...

From google: "You can use either T568A or T568B for Cat 6 wiring, but the most important factor is consistency—both ends of a single cable must use the same standard." So, if you were changing both ends of the cable, it would not matter which one you use, as long as they're the same on both...

That pretty much confirms for us that it was the MS Edge browser update that caused this issue... I was able to get Edge working again by reloading "Local Service Control" and "Web Plugin Components", but that has not worked for @busterboy ... I loaded this (latest version 2025/08/25): from...

There are lots of videos that show how to replace an RJ45 connector:

Good! I'm pretty sure if you replace that connector on the cable outside you will be good!

I don't think it had any significance, but I did delete "Cached images and files" in Edge before I tried reloading "Local Service Control" and "Web Plugin Components".

So, I updated (or just re-installed?) "Local Service Control" and "Web Plugin Components"... now live view is working again for NVR web GUI and the individual camera web GUIs :) I don't think it was the M-series firmware update that caused this... I think it was the Edge update that caused...

Can't be sure... it probably is, but pretty much any Ethernet cable would work fine, CAT5, CAT5E, CAT6, CAT7... so I wouldn't worry about that too much.... anything that looks like an Ethernet cable should work! If the cable were damaged during the woodwork, I think you would have seen the...

I'm certain that when I installed the new firmware last Wednesday (5 days ago) the live view in the Edge browser I have been using still worked... have been gone for a few days, seen this thread, checked, and I now have the same problem... no live view in Edge browser... I notice that I also...

If the camera turns out to be the culprit, we'll try to find a similar new one that will mount easily on that existing junction box cover... it shouldn't be a big deal to get it up and running. If I were in your shoes, I'd be hoping it's the camera that's bad... most of the time swapping out a...

Yes, that is perfect to test with!

Yes... those 4 screws are holding a junction box cover to the junction box... if you take them out then the camera will come off with the junction box cover... then just unclip the Ethernet connection and the camera should be free. Bring it inside and test in the same NVR port... How high up is...

It looks promising but I think it's early days yet with this V1.1.1. For instance, this simple obviously useful setting from iVMS-4200 is missing: Unless I missed something? I hope I'm wrong! :)

I loaded it: Don't see any obvious changes...

New firmware is available on Global EN and UK&IE EN DS-7616NI-M2/16P product pages (not on USA EN). No release notes. DS-7616NI-M2/16P

Be careful... I'm sure the Head Gardener knows best!!!

Yes, same on both end... I just assume that these days everyone would have an extra/unused/spare one of these laying around somewhere? Check your kitchen draws, or a box you have somewhere with extra electronic equipment, or under your bed... you must have one somewhere! :)