Search results

This is V5.7.15 and I suppose this will be the last one for me until I "EOL" my G5s. I have noticed and reported on this forum the problem with GUI 5 firmwares since last June. v5.7.17, v5.7.18 and v5.7.19 The Dual VCA(and Save Camera VCA Data) for all NVRs does not work anymore. Do not be...

The only difference with my settings is the "Upload to FTP/Memory Card/NAS" since I have added an SDcard in Camera slot. I remember that in v5.7.19 there are also some Advanced settings in Camera GUI configuration for Smart Events, that except Smart Events these could possibly concern Dynamic...

Is this also enabled in Camera GUI? Not the one you see from NVR GUI. Can't help you with your NVR. On my NXI-K and on Edge browser: Human and Vehicle must previously be set-checked in Camera Event Configuration for Motion and Smart as JB1970 says. In Playback, Play must be...

I don't know if their Libraries are better and more accurate in v5.7.19 than that of v5.7.15, but in v5.7.15 many times a Human is not recognized as Human but as Other. This is when someone can miss a Human target. Bad lighting especially at night, reflections, strange clothing we have seen in...

Hi @JohnD What are the settings for Linkage Method for both Motion and Smart Events? Is Notify Surveillance Center enabled? Did you check your cameras GUI interface to see if all the event configuration setting set on your NVR are also "passed" to your cameras? Sometimes some settings are not...

Try other apps until they fix the problem. I suppose you don't need a new account. Hik-Connect account worked at least for HiLookVision for me. HiLookVision HYU Connect Annke Vision Ezviz is also compatible but has very different interface

Can you try only with the Main Indoor Station and without the Outdoor Unit? Yes possibly this works and with Sub-Station

Did not understand this was Hik-Connect designated phone...

They are wrong.... This is a Hik-Connect version problem and/or firmware installed. That's what the do all the time. They solve and they reproduce errors, they solve and they reproduce errors. Thats what they do with everything they "Update" You must find a version of Hik-Connect that works...

There is no such setting that concerns delay for HikConnect on Indoor Stations. Did you Ping Test your devices on your Local Network either from your router or Command Prompt on a PC or by installing Hik Partner Pro checking with SADP tool? This should be very low and under 50 milliseconds for...

If this is about a Hikvision ANPR, then try re-installing both plugins necessary for iVMS4200 or browser: Webplugins and LocalServiceComponents. Edge always works, sometimes you may need to try twice. You can also use HiToolsDelivery, instead of browser or IVMS. This always exports, without...

Hi JB I am sure he(Hik-Dave) did not understand your question. He understood that this concerned the VCA, AI by NVR or VCA by NVR......

Yes, this seems to be the only solution for our, previous generation ColorVU 2.0 and NVRs. Till someone confirms for example the ColorVU 3.0 or the newer generation NVRs K/VPRO or M, support such functions with V5 firmwares

Had this issue too with NXI-K firmware v4.83.013 build 241227 https://www.use-ip.co.uk/forum/threads/hikconnect-version-v6-7-351-0110-event-playback-not-loading-next-event-or-gives-error.12200/ All versions of Android HikConnect after v6.6.500.1107 gave same error with yours OSCVG16-010004 or...

@Tomasz Those markers are not the VCA/Smart Search. These are the Event Notifications set on Event Configuration. The problem above is critical and not just an issue. It concerns the specifications and a basic function of something that they sell. They cannot change this with sneaky tricks. They...

Can't say something... I am EOL too :-) :-)

I tried on non-POE connection. Those are the messages for the iVMS4200: If you select View Certificate, then you have the option to install and possibly proceed to login page. The other way that worked for me is the Edge browser: You select Advanced and then Continue to 192.168.xxx.xxx and...

I agree with all JB writes above. I have exactly the same issues with NXI-K NVR, even this is on 4.0 firmware. I just want to add that the intended changes could also mean, buy the new ones v3.0 generation. The previous updates, for "older" devices, where all experimental

Could be so...!! But this is not necessary if NVR is not Acusense NXI. I made that work with firmware v5.7.18 and NXI-K. The option identifies Similarity(you can adjust) between targets Human or Vehicles, and gives all results. This is very useful for Stores, restaurants, car parkings etc, but I...

Yes. Smart Events are not affected. I suppose that Acusearch has to do with Intelligent search if the NVR supports this