Search results

This is also a similar question for me if you remember my post with all possible testing I had on v5.7.17 to v5.7.19 to solve the no Dual-VCA. This is, if all cameras must be updated on v5.7.19 and not just one where the rest of them are on v5.7.15. The NVR could possibly be "confused". But then...

Hi @johnfitzy If Notify Surveillance Center is Unchecked and Enable Dynamic Analysis for Motion checked, then the only way to find the markers is By Rule search drawing a grid on part of picture you want(smart search). But this happens only if G5 cameras are on firmware v5.7.15

Do you mean, the fix, also damaged v5.7.15 ? Oh God!!!

Yes, this situation drives me crazy since last June. Sometimes I re-install v5.7.15 to work properly. Sometimes also I need to set everything up again from NVR or just reboot the NVR

About the Dynamic Analysis, according to their instructions on the https://www.hikvision.com/europe/support/how-to/faq/two-steps-to-solve-no-result-of-vca-playback-search-/ they say: Notes: If search motion detection VCA playback, Enable Dynamic Analysis for Motion is necessary

Sub-Stream is also available in V5.7.15. I also disable Acusearch on cameras and Acusearch or Intelligent Search on NXI-K. The EOL one :-) :-) 30 months of release date!!!!! I think, but this could be wrong, that there is less sensitivty for Smart Events if enabled

"Device decoding timed out. Check the device network connection" If loading ends then pressing refresh loads next event. Otherwise continuous loading for ever... App Log out, clearing cache, clearing Data did not solve problem. App installed from Hikvision App Store on Samsung S21 Android 14...

At first I believed that firmwares v5.7.17 to firmware v5.7.19 had this issue only with NXI-K Acusense series NVR. @JB1970 confirmed that the "Dual VCA info" problem also exists on other series NVR. Newer and more expensive. What I have tried so far is : added as ONVIF(motion only is OK smart...

@JB1970 Found this just now looking for @terran issue and release notes. They solved this in just 40 days. Same issue now not solved for more than 7 months: https://assets.hikvision.com/prd/public/all/files/202302/Network%20Camera%20V5.7.10_sp_build220.pdf

There is a reference as modification?? in v5.7.15 release notes. Nothing else until back to v5.7.10 : "Modify Function 1. 2/3 series OSD color added customization 2. The 3xx3 model supports 4 streams, up to 8 privacy masks, supports scene change detection and audio exception detection, supports...

Can you remember if this was available with older firmware prior to v5.7.17? Sometimes also, settings for Privacy Mask are not recognized and cannot be modified by different browser or iVMS4200 or by NVR. I cannot modify Mask that is created with Edge by using iVMS4200. Possible cause is the...

This is a similar post and Hikvision response to @Dan on July last year but seems they did not understand the question(Hikvision) I suppose mosaic concerns only IPC-3 series...

This is an issue that exists since day one and all firmwares for G5s. A have seen this many many times. I saw that too 5 days ago with v5.7.15. A Human not recognized as Human and a cat recognized as Human same position and distance, same time, same lighting. The good thing with firmwares after...

If you want to continue using this NVR, you must replace(by technician) the 2 capacitors beside the power plug(top right). They(capacitors) are "dying" .......

I do not own an -M series NVR or DVR but I have read the issues and work around solutions. I have one DS-KV6113WPE1(A) added normally on NXI-K NVR, and iVMS4200. What I have noticed with this door station is that there is a problem to add this device only on one Hikvision application called...

AcuSearch will not work. You need an Acusense Camera and with latest firmwares for your NXI-K and the Acusense camera. I don't know if you can achieve the above functions if you configure Events By NVR and not by Camera

This is the release notes in firmware 4.83.005 for NXI-K

I've used this below procedure 3 times in the past for my DS-KV6113WPE1(A) and this worked... I don't know if this could work on newer devices. I think there are memory size issues same with old hikvision tftp update tool. About the new setting, I'll find the release notes for my NXI and post...

Can you check if this setting exists?

Can you add each camera on Local Network with its own IP and not through NVR to see if this issue exists with one camera? There is also an option on all NVRs Video/Audio called Channel-Zero. You see all cameras together and you can adjust bandwidth. I have never tried that but you can give it a...