Search results

If there’s an operator why do you need ANPR? Is it just for logging entry/exit times. The solution we would use: Axis A1001 door controller Axis camera with onboard LPR Application The axis A1001 Controller has Axis entry manager which is a web based user interface. The operator is able to...

Maybe try a MAC OUI search to figure out who’s equipment you’re trusting sitting on your network. This should help you find a OEM manual that will likely point you in the right direction!

Is this the Nvr or one of the camera web interfaces? If not onboard storage of a camera, it looks like your set up for continuous recording of still images.. JPEG at 3 second intervals and a pretty low resolution?

That looks to me like local sd storage settings.

I Would say that the cameras are capturing, processing and compressing the video to deliver the stream (H264 or H265) to whichever client (PC or NVR) is requesting it. Although it’s a software setting, because it’s all Hikvision software/protocol the camera settings will be dictated by the...

Great News!

I would just change video quality to medium for now to see if it has much effect. And increase the frame rate to 25 or the highest option available. I’d stick with 1920x1080 and reduce any higher resolution cameras to this too and see if you notice any improvements.

I’ve not had much experience with Hik-Connect but im pretty sure no port forwarding is required as the cameras/recorders use outbound ports to connect to hikvision servers which then, I believe forward the stream to client devices and likely initiate a p2p connection.

Are you using VLAN’s to segregate the cameras from other network traffic such as VoIP? How many hops through switches/routers do you have? Do the trunk ports and switch ports connected to the NVR support gigabit Ethernet? Although H265 is more efficient than H264, it requires more computer...

As Magic919 suggests, when the ISP is performing NAT you are unable to setup any port forwarding rules as their equipment upstream will be blocking inbound traffic. This is common with satellite broadband systems unless a pro or business package has been selected.

They are set to FLUENT [substream]. Select the display symbol (square box with diagonal lines) within the app and choose CLEAR for mainstream.

A reliable solution, and the only one I’d specify/install. Axis camera. Few options to choose from with artpec 5/6 chip. VaxALPR onboard application running with whitelist and blacklist. Onboard Sd card to store plates captured. Setup event/actions within the axis camera to send...

Are you experiencing the same latency when viewing from a local monitor connected to the NVR via HDMI?

Being the same manufacturer, would it not still require formatting and then wipe all the data?

Hi all, just wondered what the process, if any would be to recover any recordings from a HDD in the event that a NVR/DVR is dead and needs replacing?

We use Wireshark in this situation. -Download Wireshark -Run/open the Software application -Select the interface that you wish to capture packets (Ethernet/eth0) -Start capturing -Connect Ethernet cable from laptop to LAN port of POE injector -connect IP camera to POE port of POE injector to...

Hi Jon You would use the LAN port of the NVR for the cameras connected to any switches on the same Network/VLAN and the built in POE ports for direct connection to cameras.