Search results

Use AI to create a small flutter app with a single button that will use ISAPI http put request to open door

Thats how external doobvell works

Ise hik central access control or ivms4200 to configure it

That controller doesnt have web interface, it has http traffic via isapi api but not actual web

There should not be any limitation, hilook,hiwatch,hikvision is all same software.

Im sorry to say but it was prolonged till end of july. Reasons unknown atm. Lets hope its for the better

You can re add, but each device has to be manually resetted. For example keyfob: Remove battery, and reinsert while holding disarm key As for PIR, remove battery and gold tamper while you insert battery. Pretty much same for all devices. Only then you can add to the panel

there are multiple reasons, just scroll this forum with 1.3.0 firmwares

Stay on 1.2.9

There is newer, but its EU firmware 5.7.13 https://www.hikvisioneurope.com/eu/portal/?dir=portal/Technical%20Materials/00%20%20Network%20Camera/00%20%20Product%20Firmware/Temporary/G5%20Platform%EF%BC%882xxxG2%28C%29%EF%BC%89/RTMP

i wonder if HDMI network extender would work in that case, or only physical network

Week away from 3.7.x firmware release

All i see now is blank schedule, not a continuous one. Draw it on schdeule amd copy to all channels

You put recording schedule to continuous

ah you are on android based one. Still it should have Capture (Snapshot) setting, but im not sure for recording.

Do you have indoor station on 2.2.100 firmware version? You need to manually enable capture snapshot on it to work. With new firmware 2.2.100 you can even enable motion recording directly on indoor station(You need to have SD Card inside)

It will be released again pretty soon. The one with bug fixes.

The wizzard on new indoorstation should guide you. It may be the problem if the password on door station is not the one you tried. Protocol 2.0 states that in order to register new indoor station to door station, you have to register it via registration password. It may or may not be the same...

if i understood correctly, your problem is that you dont get a single 30min file but rather piece of chunks recorded? Well considering your bar color it is set to Motion/Alarm, so regardless of full bar its chunks of prerec and postrec merged together, it will be like that. Use VSPlayer it will...

How i know is irrelevant, what are your issues?