Search results

This is a similar post and Hikvision response to @Dan on July last year but seems they did not understand the question(Hikvision) I suppose mosaic concerns only IPC-3 series...

This is an issue that exists since day one and all firmwares for G5s. A have seen this many many times. I saw that too 5 days ago with v5.7.15. A Human not recognized as Human and a cat recognized as Human same position and distance, same time, same lighting. The good thing with firmwares after...

If you want to continue using this NVR, you must replace(by technician) the 2 capacitors beside the power plug(top right). They(capacitors) are "dying" .......

I do not own an -M series NVR or DVR but I have read the issues and work around solutions. I have one DS-KV6113WPE1(A) added normally on NXI-K NVR, and iVMS4200. What I have noticed with this door station is that there is a problem to add this device only on one Hikvision application called...

AcuSearch will not work. You need an Acusense Camera and with latest firmwares for your NXI-K and the Acusense camera. I don't know if you can achieve the above functions if you configure Events By NVR and not by Camera

This is the release notes in firmware 4.83.005 for NXI-K

I've used this below procedure 3 times in the past for my DS-KV6113WPE1(A) and this worked... I don't know if this could work on newer devices. I think there are memory size issues same with old hikvision tftp update tool. About the new setting, I'll find the release notes for my NXI and post...

Can you check if this setting exists?

Can you add each camera on Local Network with its own IP and not through NVR to see if this issue exists with one camera? There is also an option on all NVRs Video/Audio called Channel-Zero. You see all cameras together and you can adjust bandwidth. I have never tried that but you can give it a...

Just for testing, can you change your Wifi security protocol to WPA2 Personal? There was many issues with older devices(older than a year) Connection and disconnection might cause this that you think it is a delay...

Cannot understand why WPA3 is the default

No it isn't.... Either external power supply or internal board

Have you checked the Firewall settings on your router? Is this the Default or something like Medium or High? Are there any Parental Control Rules?

What is the message you receive on Live View window? Is this about an Encryption Password?

I am not sure but I think that ONVIF standard is necessaty for RTSP network protocol to work. No ONVIF interoperability, then no RTSP. Is there a Mask or ROI set on your camera stream? Try deleting them and also try to disable all Display Name, Date and Week from OSD Settings. Also if your...

I don't believe that the specific issue it's a matter of rewritten logic. For example, the SDcard of the G5 on v5.7.17, v5.7.18 and v5.7.19 records every kind of event, motion or smart and nothing escapes. Also, if set so in Events Configuration, the Events that we want to give notifications...

Just to be sure once again, I installed an WD 1TB HDD in place of my previous SSDs in case of incompatibility. There is no change in Motion VCA search and in Smart VCA search by Rules. Nothing is found on my NXI-K Playback Normal or Event. Unfortunately the same thing happens if VCA Events are...

Try Angry ip scanner or Advanced IP scanner to check if another device on your network uses the same IP. The simplest way to test is to check if this is working on VLC. If this works then it's the ispy incompatible

Try changing your IP. Use an other and not 192.168.1.64. Assign this new IP only for your camera's MAC Address in router settings. Also change DNS Server. Try primary 8.8.8.8 and secondary 8.8.4.4. Then reboot. Is your camera connected on unmanaged switch? Power OFF and restart switch or try...

I am on SSDs and starting to be suspicious... :-) :-) :-)