Search results

That's what I found. The old G2 a bit softer but practically noise free. The new G3 sharper but noisier. There was a lot of hype about that in the presentation. They showed the previous generation with someone walking past to show the motion blur, then they repeated it with the Gen 3...

Yeah it would be good to see 2387G2 vs 2387G2H vs 2387G3 in the same environment/lighting conditions.

My issues continued with this firmware. The unit is standalone, hard wired to the network with no previous issues Working: Start live view Call received on Hik-Connect 2 Way Audio Snapshot and notification logged in Hik-Connect from call Not working: Video will not load when call is...

Yes

I wouldn't necessarily be put off. If it was a bug I'd expect more people to have reported issues and that has not been the case; I guess it's just a glitch on mine. Yes. It was added as an access control device on the 2.2.78 intercom firmware with the current 5.04.050 M firmware and was...

The newest 5.04 firmware fixed it so that it can be added as access control device rather than needing to use RTSP. The doorbell 3.70 firmware breaks that fix and you're back to adding using RTSP. My KV6113-WPE1(c) no longer works since upgrade to 3.70. The call comes through to Hik-Connect...

It might be worth replacing the power supply as that's the likely culprit. If it's an external 48/52V supply it should be easy to get hold of one but if it's the internal type they're difficult to get hold of and TBH the cost makes buying a replacement NVR a better proposition. A replacement...

If you find the maintenance page in the NVR menu you'll be able to view the logs and they will tell you what the cause is. The beeping alarm usually is hard drive issue but any event can be configured to sound it, so it could be something else. Without knowing the content of the logs no-one...

node-red is a sort of rule engine used for smart home setups such as Hubitat or Home Assistant. It just needs an always on machine to run such as a Raspberry Pi or can run in Docker on a NAS drive. Although I'm using it primarily for smart home purposes, it can be used for all sorts of...

The iDS-7216HQHI-M2 is a DVR not an NVR. It will allow IP cameras to be added but the camera won't necessarily be fully operable via the DVR (DVRs are primarily used with analogue cameras via coaxial cabling). On a DVR, the line crossing for analogue cameras is programmed on the DVR; as the...

Done

@alexdel - regarding the VPN suggestion.. You may be able to set up a VPN server on your network depending on what router you currently have for your internet connection. My Unifi Dream Router has his facility and many other routers do also. A corresponding VPN client app can be set up on...

I've got an inkling it would still work without Virtual Host with that node as the it's the NVR event stream not the camera's that the node connects to. The issue comes when you try to use the alarm server (or http listening depending on firmware) of an NVR PoE connected camera. In that...

The original 8MP 2387G2 had the 1/1.2" sensor while the 4MP 2347G2 had the smaller 1/1.8" sensor. The newer 8MP 2387G2H and the 4MP 2347G2H both share a 1/1.8" sensor as do the new G3 models. However there was a difference in alleged minimum illumination values. The G2H lost out on the G2 due...

In my flow, the top three nodes in the first post are - "NVR - Line Crossing", "Set Channel" (a Change Node) and "Split Channel" (a Switch node) The setup for those three nodes is shown in order in the second post. I'd start by setting it up that way for just Line Crossing or whatever. For...

I'll do the magic reboot and try again (I should've done that first). Just to clarify I meant pinch to digital zoom on fixed cameras rather than PTZs with optical - is that the same on yours? Edit: vol up, vol down, hold side button until apple logo....fixed

@alfaclvi - dual VCA search not working in this new H13U platform either....

I could do with clarification from Hikvision UK. I made a comment via the App Store reviews page.

Hik-Connect 6.8.400.20250317.1 (latest version at time of writing) I just noticed yesterday that pinch to zoom no longer works in landscape mode for me since updating my phone to iOS 18.4. Now only the zoom icon works which only gives you a single zoom level. You can pinch to zoom when the...

I'd be tempted to leave well alone unless you want to start paying. They even charge me to add my logo to my customers apps!