Search results

the IP address 192.168.254.5 is a separate lan on the nvr check in your nvr if virtual host Is on, is in camera settings if it’s on, then you can reach your cams via nvr ip:65001 for cam 1. For example 192.168.1.56:65001 that works at my place

@JB1970 I can confirm that SVC was on on my device as well, i upgraded from 4.30.010 automatically to 4.30.055, it was still on. As i have only 2 cams (ds-2cd2047gu-lu) yet, it didn’t gave the no resource yet, but the third is on his way, so to prevent myself, i switched svc off on the nvr...

while you're able to get into the nvr cause all the camera's are working you said, so within hik-connect it all is OK now. In the NVR within the option camera you see the ip address of them, but those might be assigned by the NVR itself and therefor not accessible directly, but............ From...

What i would do is use your neigbours cable to see when connected that your nvr comes back to live and that your issue is resolved. Then you can replace that cable that isn’t working. We know the cable isn’t good, but you want to know that the issue is not at your router. So if possible remove...

Are the lights blinking green/orange above on the ethernetcable socket on the nvr and on the router? if no Lights are blinking then the cable isn’t in on router or cable is defective. Maybe someone has s longer cable to borrow from or even a lan-checker to test te cable. On the photo i can’t see...

To me it seems that the device doesn't get an proper DHCP adress from the router's DHCP server, as it assigns an APIPA address . APIPA stands for Automatic Private IP Addressing (APIPA). It is a feature or characteristic in operating systems (eg. Windows) which enables computers to...

I even found out that on the productwebpage this new 5.5.160_210108 firmware and release notes appeared to be downloaded, while on the eu portal it is gone.

Hi @Dan Thanks for your prompt reply. All is working fine and indeed this one is from grey import (sorry), they can be upgraded and downgraded with UE portal firmware, so no real issues, only a visual correction was needed, while the microphone is working fine, but the model without (U) is...

Hi, When i select restore to default, i know all parameters will get lost. But what i don't know if that also will take care of the factory installed firmware to get back on the device incl the empty modelno/firmware. The reason i ask is because I have a U model (DS-2CD2047G2-LU) but it shows...

https://easyupload.io/bdjiz0 i was already afraid of it the link has 1 day expiration good luck with it

i can share it with you, sent me an PM please, uploading here doesn't work. I can't promise it will work on your cam like upgrade and downgrade, while there are more people in which it failed. For my 2 cams it worked.

Today i updated 1 camera from 5.5.150 to 5.5.160 and downgraded to 5.5.150 without issues on my ds-2cd2047g2-lu. I have to say, those are connected on my nvr and i don’t get those up or downgrade messages. i wanted the led light to turn on, on the smart event intruder detection, but after...