Search results

So I have finally accepted defeat with this dvr, I’m going to buy a new system, and try to find someone local who can take a look at this system at a component level. If I get it working, I can install it in my parents house. Thank you all for your help, I’ll use the info to try to find the...

Also, there must have been power after the power cut to channel 1, as it was working, so I am guessing it’s just having to set them up again. I have also checked the cables, no corrosion at all, every connector is in a waterproof box and cannot be touched by rain. Thanks again for all your help.

Hi, many thanks for your reply. So the camera that was working after the power cut was channel 1. I have connected this directly to the rj port in each channel. There are no green lights on any channel port. This camera was working, and stupidly I reset to factory settings and then it dropped...

Currently I have the dvr connected to the internet via a lan cable. To get the cameras working, do I need the dvr to be connected to the internet? I am not bothered at the moment to have the app working, I just want to get the cameras back online!! Many thanks

There is a green power light on the camera cable, this was powered but now there is no power to the system.

Sorry also there does not seem to be any hard reset buttons on the cameras. Just a cable inside.

Hi again, So I have removed one camera, and brought it to the dvr with a short cat 6 cable. There are no lights at the port, and there is no power to the camera. It seems that there is no power out from the ports. I have tried the camera each port. No lights at the back for each port, and...

Hi, When I first connected them they didn’t work, but on the photo I attached at the start, when you click add one, it enabled the camera and they just worked. I can’t seem to get the dvr to find the camera. I will be taking down one of the cameras later, I’ll check for a hard reset button...

I’ll have to take down one of the cameras, and take pictures of the nvr. There are no markings on it, eg a brand. I bought it off a local store in the uk about 5 years ago, relocated abroad now, I brought the cameras and system with me and installed them in the new house. There are 8 cameras...

Hi all, I have a basic nvr with 8 channels poe. It has worked very well for the past 4 years, but after a power cut the power cable to the nvr failed. I have a new cable and the nvr worked well, however only 1 camera remained, and I (probably stupidly) did a factory reset. So on the video...